GENUINE SMALL MEERSCHAUM KITS from ESKISEHIR TURKEY

25% DISCOUNT TO MEET WILL BE APPLIED TO CART TOTAL

These Meerschaum pieces are not graded but guarantied air tight nature when become smoking pipes. Not any open fault line or pit. Each one can be used in many different projects or trials. 
Each piece pictured from two different faces. Given dimensions in millimeters are on the photo and taken from estimated middle points. Each pieces maximum possible fire chamber diameters and depths (+- 10%) are also on the chart.

Each piece will be delivered whole. Fire chamber or any other holes will not be drilled. 

And yes; it can be used as hydrostone humidifier in humidors and tobacco containers. Meerschaums super fine absorbing capacity help it keeps 1 - 1.5 times water comparing its own weight and releases this water as humidity for a prolonged time. Wetting - drying cycle is endless.

Each piece will come together with 10 cm – 4” long and 5 mm diameter aluminum shanked acrylic mouthpiece which is also on the photos. Use a 4.5 mm drill bit to fit the shank to the stummel when stone is wet and insert the shank into the stummel with a little force.

All meerschaums listed in the website are from “Sarisu” mines from most respected suppliers now. Sarisu district of Eskisehir yields best quality stones and well known among Meerschaum community. 

Reference squares on the photos are 1/2" - 1,25 cm

Block will be delivered dry. 

To carve your block easily and effectively: Wet the surface of the stone completely with the water you've sprayed on. Then, wrap the stone in a thoroughly damp piece of tissue paper and place it in a sealed container, such as a zip-lock bag. After about an hour, the Meerschaum will be ready for carving. If you're carving deep enough to approach the dry center of the stone, you can spray the dry area you've reached with water and continue carving. Once you've finished carving, let the stone sit open air until it's completely dry. After final sanding while the stone is dry, seal your carving by dipping it in melted, liquefied beeswax or carnauba wax. Wipe the excess wax with some tissue while the piece still hot with heat of the melted wax. Now it is ready to gently buff with or without some carnauba wax. Natural beeswax gives a distinctive honey color to carved items. Even with traditional use of purified beeswax, pure white will tint a little towards ivory color. With carnauba the item will be darker.